Gas Laws In Action
Label each axis with a scale by typing in a value in each space along the axes. Select DONE after you assign values.
Some or all of your numbers are incorrect. Check your data to determine the numbers for the axis. To correct a number, highlight it; then type in the new number. When you are ready, click DONE.
Not all the numbers are correct. Try using increments of five on the x-axis beginning with 275, and increments of 0.20 on the y-axis beginning with 7.20. When you are finished, press the DONE button.
Some or all of your data is incorrect. Look at this table and note the range of values for volume and temperature. Then divide the range into even increments on each axis of the graph. Then click the right arrow to continue.
Good job. Click the right arrow to continue.
| Time (min) |
Temp (k) |
Circumference (cm) |
Diameter (cm) |
Radius (cm) |
Volume (L) |
|---|---|---|---|---|---|
| 0 | 296 | 77.5 | 24.6 | 12.3 | 7.79 |
| 15 | 293 | 77.2 | 24.5 | 12.25 | 7.69 |
| 30 | 287 | 76.7 | 24.4 | 12.2 | 7.60 |
| 45 | 282 | 76.2 | 24.2 | 12.1 | 7.41 |
| 60 | 275 | 75.6 | 24.0 | 12.0 | 7.23 |
Gas Laws in Action
 |
Done | ||||||||||||
|
|
|||||||||||||
